生物技术通报 ›› 2014, Vol. 0 ›› Issue (1): 171-176.

• 研究报告 • 上一篇    下一篇

响应面法优化纤维堆囊菌SoF5-76 产埃博霉素B发酵培养基

龚国利,王娜,刘丽丽   

  1. 陕西科技大学 生命科学与工程学院,西安 710021
  • 收稿日期:2013-08-15 出版日期:2014-01-23 发布日期:2014-01-23
  • 作者简介:龚国利,男,副教授,硕士生导师,研究方向: 生物制药技术;E-mail: gongguoli@sust.edu.cn
  • 基金资助:
    陕西省教育厅自然科学专项(12JK1023),国家自然科学基金项目(20906058)

Medium Optimization for Enhanced Production of Epothilone B by Sorangium cellulosum SoF5-76 Using Response Surface#br#Methodology

Gong Guoli, Wang Na, Liu Lili   

  1. College of Life Science and Engineering,Shaanxi University of Science and Technology, Xi’an 710021
  • Received:2013-08-15 Published:2014-01-23 Online:2014-01-23

摘要: 以纤维堆囊菌SOF5-76 为试验菌株,用响应面分析法对其产埃博霉素B 的培养基进行优化,以提高埃博霉素B 的产量。#br#在单因素试验的基础上,利用Plackett-Burman 筛选出对埃博霉素B 产量有显著影响的3 个因素为马铃薯淀粉、脱脂奶粉和无水氯#br#化钙,在此基础上通过最陡爬坡试验逼近最佳响应面区域;再运用Box-Behnken 试验设计和响应面分析法进行回归分析,确定重#br#要因素的最优浓度。得到最佳发酵培养基为: 马铃薯淀粉3.9 g/L、脱脂奶粉2.2 g/L、无水氯化钙1.3 g/L、葡萄糖1 g/L,豆饼粉1.5#br#g/L,七水硫酸镁2.5 g/L,EDTA-Fe3+ 3 mL/L,微量元素(TE)0.5 mL/L,VB12 1 mL/L。在此最优条件下发酵埃博霉素B 的产量为#br#29.95 mg/L,与模型预测值接近,发酵产量比优化前提高了1.1 倍。

关键词: 埃博霉素B, 纤维堆囊菌, 发酵培养基, 响应面法优化

Abstract: The response surface methodology(RSM)was employed to optimize the medium composition for Epothilone B produced by Sorangium cellulosum SoF5-76. On the basis of one-variable-at-a-time design, using Plackett-Burman design, potato starch, skimmed milk powder and calcium chloride were screened out of 9 factors as main affecting variables of Epothilone B production, and then steepest ascent method was used to approach their maximum response regions, followed by Box-Behnken design, multiple regression analysis and response surface analysis. The optimum medium formula determined was composed of potato starch 3.9 g/L, skim milk powder 2.2 g /L, chlorine calcium 1.3 g/L, glucose 1 g/L, soybean powder 1.5 g/L, magnesium sulfate 2.5 g/L, EDTA-Fe3 + 3 mL/L, trace elements 0.5 mL/L, VB12 1 mL/L. Under this optimal conditions, Epothilone B production reached up to 29.95 mg/L and increased 1.1 times in average as compared with preliminary culture and consistent with the maxmum predicted value.